[Greenbuilding] Cob as an alternative to spray foam sealant?

Michael O'Brien obrien at hevanet.com
Fri Jan 28 13:14:10 CST 2011


Hi, Frank--

I have seen this done in Germany, as part of "leichtlehm" earth wall assembly. Clay slip is mixed with foam glass beads or expanded shale to lightenit up and add insulating value. In our case we mixed clay with cedar wood chips and poured it into wall cavities.

Best,

Mike O'Brien


On Jan 28, 2011, at 9:16 AM, Frank Cetera wrote:

> I'd like to know the same thing Steve (using a clay slip mixture, what's the perlite for?).  Even if no one has ever attempted it, is there anyone that can provide any professional opinion on the matter?
> 
> Steve Satow, would it be a big deal if the cob shrank when it dried when filling in shell air gaps?  If you dabbed the cob across any gaps and left extra on the sides to shrink some?  How much does cob typically shrink?
> 
> "Ever since then,
> I've had the idea kicking around in my head to try a clay slip/perlite
> mixture sprayed into wall cavities like gunnite or shotcrete, anyone
> know if this has ever been attempted?
> 
> I know it wouldn't be nearly as airtight or as insulating as spray
> foam, but it would be better than nothing and still completely
> biodegradable. :)"
> 
>   
> ~Frank
> www.alchemicalnursery.org
> 
> Message: 5
> Date: Wed, 26 Jan 2011 13:53:51 -0800
> From: natural building <naturalbuilding at shaw.ca>
> To: Green Building <greenbuilding at lists.bioenergylists.org>
> Cc: Greenbuilding at bioenergylists.org
> Subject: Re: [Greenbuilding] Cob as an alternative to spray foam
>        sealant?
> Message-ID: <6EF75DF2-312E-47C8-9390-B75AEE63557E at shaw.ca>
> Content-Type: text/plain; charset="us-ascii"; Format="flowed";
>        DelSp="yes"
> 
> Sheep's wool was traditionally used for caulking log homes.
> You can still buy it ( http://www.goodshepherdwool.com ) treated with
> Borax to make it more resistant to decay and fire (like blown
> cellulose insulation) and it might work better in cracks because it
> will swell, whereas cob is going to shrink as it dries.
> 
> Regards,
> Steve Satow
> 
> www.naturalbuildingsite.net
> naturalbuilding at shaw.ca
> 
> On 26-Jan-11, at 1:40 PM, Frank Cetera wrote:
> 
> > Is is doable to take wads of cob and seal up the cracks and air
> > seeps that are throughout the shell of the house?
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.bioenergylists.org/pipermail/greenbuilding_lists.bioenergylists.org/attachments/20110126/8e697471/attachment-0003.html>
> 
> ------------------------------
> 
> Message: 6
> Date: Wed, 26 Jan 2011 14:15:22 -0800
> From: Steve <steve at greengeek.ca>
> To: Green Building <greenbuilding at lists.bioenergylists.org>
> Subject: Re: [Greenbuilding] Cob as an alternative to spray foam
>        sealant?
> Message-ID:
>        <AANLkTikHJ7gdqfLeXNr=KNOF4SjreNFa+ZA_VXmUZUzm at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
> 
> A couple of years ago I was talking with a relative about ways to
> build structures with modern techniques and traditional (natural)
> materials, and the subject of spray foam came up. Ever since then,
> I've had the idea kicking around in my head to try a clay slip/perlite
> mixture sprayed into wall cavities like gunnite or shotcrete, anyone
> know if this has ever been attempted?
> 
> I know it wouldn't be nearly as airtight or as insulating as spray
> foam, but it would be better than nothing and still completely
> biodegradable. :)
> 
> -Steve
> --
> http://www.greengeek.ca _______________________________________________
> Greenbuilding mailing list
> to Send a Message to the list, use the email address
> Greenbuilding at bioenergylists.org
> 
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/greenbuilding_lists.bioenergylists.org/attachments/20110128/31b3f4cd/attachment.html>


More information about the Greenbuilding mailing list