[Greenbuilding] Cheap flooring

Gennaro Brooks-Church - Eco Brooklyn info at ecobrooklyn.com
Wed Feb 20 13:10:30 CST 2013


If that picture is an indication of your existing floor then I would say
you have a great floor. Patch the large holes with wood the small holes
with saw dust/wood filler/stain, sand it all down, patch medium holes with
old tin like they did in the old times, oil it with four layers of tung oil
and citrus solvent (lay it on thick and remove ALL excess 20 min later,
repeat 24hrs later). The results are priceless.

Gennaro Brooks-Church
Director, Eco Brooklyn Inc.
Cell: 1 347 244 3016 USA
www.EcoBrooklyn.com
22 2nd St; Brooklyn, NY 11231


On Wed, Feb 20, 2013 at 1:23 PM, Benjamin Pratt
<benjamin.g.pratt at gmail.com>wrote:

> I'm leading a small team of students to do furniture and interior
> design for a local internet cafe that is opening up. They came to us
> because they have a tiny budget. My university gets grants to help
> local businesses, and we work for cheap.
> The existing floor mostly maple and oak, is in bad shape, with a lot
> of holes and
> other damage. There is also a 1" or so level change where there was a
> wall. My two ideas so far are in the links below.The first could
> possibly bridge the level change and would definitely cover the holes.
>  I was trying to find a floor I saw in another store that seemed to be
> rough-sanded lumber, with no appearance of any finish at all. I
> couldn't find it, but the second link is close.
> Any comments on my ideas, or have any other recommendations?
>
>
>
> http://www.picklee.com/2012/12/12/farmhouse-wide-plank-floor-made-from-plywood-diy/
>
>
> http://wormtracks.wordpress.com/2011/01/12/beautiful-wood-seen-at-anthropologie/
>
>
> --
>
>
> b e n j a m i n p r a t t
>
> professor art+design
> the university of wisconsin stout
>
> _______________________________________________
> Greenbuilding mailing list
> to Send a Message to the list, use the email address
> Greenbuilding at bioenergylists.org
>
> to UNSUBSCRIBE or Change your List Settings use the web page
>
> http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/greenbuilding_lists.bioenergylists.org/attachments/20130220/49bf88dc/attachment.html>


More information about the Greenbuilding mailing list