[Greenbuilding] translucent material needed

[Clarke Olsen]

Bubble wrap?
Clarke Olsen
clarkeolsendesign.com
373 route 203
Spencertown, NY 12165 
USA
518-392-4640
colsen at taconic.net




On Jun 30, 2017, at 12:36 PM, Sacie Lambertson <sacie.lambertson at gmail.com> wrote:

> All, since there remains a bit of life on this forum, I thought I would ask if any of you have a suggestion for a material that has some R-value to it but is at the same time translucent.  Much like Kalwal is, if any of you are familiar with that product.
> 
> I have three windows in a bay through which I want good light but at the same time also want to add another layer on the interior side of the windows that might make the openings more energy efficient.  The windows will never be opened but I do want light through them during the day.  They will have glass shelves in front of them too so shades etc are not in the cards.
> 
> Suggestions welcome.  At 28" x 72" the windows are huge holes in this room.  I want to modify this.
> 
> thanks, Sacie
> _______________________________________________
> Greenbuilding mailing list
> to Send a Message to the list, use the email address
> Greenbuilding at bioenergylists.org
> 
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/greenbuilding_lists.bioenergylists.org/attachments/20170630/a63eae59/attachment.html>