[Stoves] Damp fuel in TLUDs

[Paul Anderson]

Crispin,

That sounds reasonable.   Do that with a couple of replications, and 
maybe check at a couple of different heights.

What is important is to note the conditions of the raw fuel, the zone of 
the pyrolytic front, and the residual char that is accumulating.

Two different conditions of operation (high power and low power) could 
have impact, and could be considered if he has time.

Paul

Doc  /  Dr TLUD  /  Prof. Paul S. Anderson, PhD
Email:  psanders at ilstu.edu
Skype:   paultlud    Phone: +1-309-452-7072
Website:  www.drtlud.com

On 3/23/2016 11:06 PM, Crispin Pemberton-Pigott wrote:
>
> Dear Paul
>
> I have done so and discussed on line with him this evening, describing 
> briefly how to set up the experiment. Ideally he needs two 
> simultaneous measurement sampling from two heights to prove there is 
> an increase in CO with height.
>
> Agreed?
>
> Crispin
>
> **
>
> Crispin,
>
> Please do ask your friend Raiz Ahmad to conduct the experiment if it 
> is not too taxing.
>
>
>     We could easily investigate this by taking gas samples from within
>     the bed as the front goes by and later, under different air flow
>     conditions to see if there is a detectable level of water gas
>     production. I will ask Riaz Ahmad at CAU if he is interested in
>     look at that. It is in his area of research.
>
>
> Paul
>
>
>
>
> _______________________________________________
> Stoves mailing list
>
> to Send a Message to the list, use the email address
> stoves at lists.bioenergylists.org
>
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org
>
> for more Biomass Cooking Stoves,  News and Information see our web site:
> http://stoves.bioenergylists.org/
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/stoves_lists.bioenergylists.org/attachments/20160324/cc672e86/attachment.html>