[Stoves] Chinese stove photo sequence

[neiltm at uwclub.net]

On 20 Jan 2017 at 3:03, I wrote:

> This is wood I would not attempt to try 
> to light off.  The outside was wet, the 
> heart wood damp.  I suppose I should 
> weigh, dry and re-weigh a piece to 
> determine the actual moisture content 
> shouldn't I?

The moisture content of my bottom wet 
wood layer was 33.5%, or one third to 
you.  It was coppiced Hazel, seasoned 
over about 3 years and brittle.  The 
moisture content was therefore from 
storage outside not under cover in the 
wet UK winter, but airborn, not on the 
ground.

How does that rate as a moisture 
content for a TLUD?

Neil Taylor