[Gasification] Sawdust in Fan TLUD
Pete & Sheri
spaco at baldwin-telecom.net
Fri Jun 3 11:01:15 CDT 2011
Could one possibly semi-pelletize the sawdust directly at the input to the
gasifier? I see pellet makers that use a screw extrusion method. If one
could get enough compaction to loosely hold the particles together, right at
the input point, then there wouldn't be the "spouting" discussed previously.
There also wouldn't be all that pressurized air to deal with. The compacted
material would also create a "seal" between the gasifier and the outside
world, if needed.
More information about the Gasification